Visit our forum www.rotarycommunity.com

Apexi ECU

Online Catalogue | Engine & performance | Electronics | Apexi ECU

Apexi model info

Apexi release the Power FC ECU in three different flavours:

1. 414-Z001 (FD3S1) - this fitted the 1995-1998 fd's.
2. 414-Z002 (FD3S2) - this fitted the 1991-1995 fd's.
3. 414-Z003 (FD3S3) - this fitted the 1998 on fd's.

After a short while Apexi then upgraded the software version and made the chip in the ECU soldered non-removable, unlike those above where the chip was a pin type and could be removed.

re-release

Apexi re-released the Power Fc's serving the same purposes but with different serial and part numbers:

4. 414-Z004 (FD3S4) - this fitted the 1991-1995 fd's.
5. 414-Z005 (FD3S5) - this fitted the 1995-1998 fd's.
6. 414-Z006 (FD3S6) - this fitted the 1998 on fd's.

Nowadays you will find that all new power fc's sold new are one of the three later models. The most common over here is the 414-Z004 this is simply due to the fact that there are more 1991-1995 cars out there.
PFC Manual

Commanders

COMMANDER (this is generally where people get confused)

With each of the models of Power Fc that Apexi released the provided a hand held interface module called the Commander. With the commander you could read/monitor all the parameters that were accesable through the Apexi Power FC ECU. The commander also gives the ability to Write SOME commands to the ECU (for full mapping capabilities a specific software package is required, this is called DATALOGIT).

POWER FC NUMBER---------------------COMMANDER NUMBER

414-Z001 --------------------------------415-Z001
414-Z002 --------------------------------415-Z001
414-Z003 --------------------------------415-Z001
414-Z004 --------------------------------415-Z002
414-Z005 --------------------------------????????? (doesnt say)
414-Z006 --------------------------------415-X001
Commander manual

Acknowledgement

Writen and used with kind permission from
Nick

If anyone can fill in the one blank area on the commanders that would be great, drop me a mail.

Apexi PFC inc commander

Price: £800.00 (£960.00 Including VAT at 20%)

Apexi PFC inc commander for the 3rd generation RX7 FD
PFC Manual